Home Services Sound Insulation and Noise Control Hall and Studio Acoustics Contacts
We provide BUILDING ACOUSTIC Report service by our acoustic experts who have been authorized in accordance with the Regulation on the Protection of the Buildings Against Noise, which has been made obligatory by the Ministry of Environment and Urbanization on May 31, 2018. The regulation was published on 31.05.2017 and entered into force on 31.05.2018. However, according to the amendment made on 31.05.2018 (Ninth Section), an architectural acoustic report should be prepared instead of acoustic report. Therefore, the Architectural Acoustic Report must be prepared and submitted for all kinds of buildings during the process of obtaining the Construction Permits by the Project Owner. Article 5 (2) of the Regulation on the Protection of Buildings Against Noise as published in the Official Paper dated 31.05.2017 and numbered 30082 is like in the attached (Click here for the relevant regulation.) construction permit is not provided if it is not in accordance with the prescribed conditions. In the event that it is determined that no new manufacturing or building renovation has been carried out according to the principles specified in this Regulation in the building or building in which the purpose has been changed, the building use permit is not given to the building until such shortcomings are eliminated.
Consultancy and Application
Many people think of the expertise of an acoustic consultant as the design of entertainment and performing arts venues. But an acoustic consultant; architectural acoustics, noise and vibration control should also be considered as an expert in all types and sizes of projects from single room acoustics to large, complex structures.
In fact, most of the design and implementation works we are working on are made up of a wide range of typical, everyday projects. Our acoustic engineering; Our team of noise and vibration consultants are at your service.
Our architectural acoustical consultancy services include consultancy service provided to the project or application team for the places where acoustic arrangement should be made in accordance with a certain purpose. In such consultancy services, the primary objective is to produce solutions that are appropriate and suitable for the needs of the project. In addition, it is important to be able to respond quickly to the project team using effective calculation methods. Application procedures are performed by our expert teams if desired.
We provides services for the measurement of many acoustic properties in the areas of environmental noise, volume acoustics, insulation measurement and electroacoustic. All of the measurements are carried out by trained experts and fully comply with international standards. The data obtained as a result of the measurements can be used for the determination of problems in a completed structure or for information collection for an ongoing design.
2014 © Bilge Akustik